, ,


Leopфкв manicure

26 May 2019
by Елена Иванова

The fashion for leopard manicure is back, and in this regard, we have prepared for you a lot of different novelties with animal prints.

Today we will show an example of a leopard manicure in turquoise tones.

To perform a manicure, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Water;
  • Tweezers;
  • Baf;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

5-1586-1.jpg?1558889744511

5-1586-2.jpg?1558889771447

First, apply the base and color coating. Today we have chosen the NeoNail soft blue gel polish (number 3648-1).

5-1586-3.jpg?1558889830038

As a design, take the slider from BPW.Style (number 5-1586).

5-1586-4.jpg?1558889865760

We chose a design for the entire nail plate, so we will mount it on an undamped base.

To do this, apply a thin layer of base on a color coating.

In parallel with this, we cut out the design and put it in water to separate it from the substrate.

Gently with tweezers, put the design on a wet base and use a silicone brush to smooth it on the surface, removing all air bubbles. Excess length at the end bend.

We place in the lamp.

After the base has dried, and the slider has already been securely fixed on the nail plate, remove the excess length of the slider from the end with the help of the buff.

To consolidate the design, as well as to align the nail plate, apply the base, sealing the design.

Dry and remove the sticky layer.

Here we have such a gentle manicure with a trendy pattern.

5-1586-5.jpg?1558890230803

5-1586-6.jpg?1558890256384

Follow us on Instagram and Facebook so as not to miss the latest news.

Nail design with glass flowers

26 May 2019
by Елена Иванова

We continue to acquaint you with the new glass effec sliderst. The hero of this review will be the design with colors 3d233

To perform this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

3d233-1.jpg?1558892113908

3d233-2.jpg?1558892141487

First, apply the base, as well as color coating. Today we have chosen Cristina soft pink gel polish (shade 1408).

3d233-3.jpg?1558892170325

And for the design we take the slider from BPW.Style (number 3d-233).

3d233-4.jpg?1558892221949

Cut out the design and place in water for a few seconds.

At the same time, apply a thin layer on the color coating.

Separate the design from the substrate and put it on the undoled base. The design of the film begins to melt at the base, so you need to quickly smooth it on the surface, remove the bubbles and press the edges of the design.

Sent to the lamp.

For fixing apply a thin layer of top. Dry and remove the sticky layer.

Here we have such a wonderful design with bright colors.

3d233-5.jpg?1558892798321

3d233-6.jpg?1558892833179

3d233-7.jpg?1558892883194

3d233-8.jpg?1558892926115

3d233-9.jpg?1558893006213

Follow us on Instagram and Facebook so as not to miss the latest news.

​Design with volume butterflies

22 May 2019
by Елена Иванова

What a summer without butterflies! Butterflies on the nails - this is certainly a win-win version of the summer manicure. Today we will show a design option with white voluminous butterflies.

To perform this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

3d245-1.jpg?1558548161402

3d245-2.jpg?1558548200551

First, apply the base and color coating. Today we took Kodi hot pink gel polish (number 166), as well as purple Cristina (shade 1452).

3d245-3.jpg?1558548232913

As a design, we take a slider from BPW.Style (number 3d245).

3d245-4.jpg?1558548263328

First, cut out the slider fragments and put them on a wet cotton pad or drop into the water.

Apply a thin layer of base to the color coating.

Separating the design from the substrate, put it on the base and align with a silicone brush. Sent to the lamp.

Take the top, squeeze the brush from the material and seal the design. We leave for a few seconds to top leveled on the surface and dry. Remove the sticky layer.

This is the design with cute butterflies and dragonflies.

3d245-5.jpg?1558548400246

3d245-6.jpg?1558548532317

3d245-7.jpg?1558548555399

3d245-8.jpg?1558548580327

3d245-9.jpg?1558548619517

Follow us on Instagram and Facebook so as not to miss the latest news.

Net manicure

15 May 2019
by Елена Иванова

One of the trends of the last time - manicure "web". Today we will show how easy it is to create such a design with the help of nail sliders.

To perform this manicure, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Water;
  • Tweezers;
  • Silicone brush;
  • Paper napkin;
  • Gel polish lamp;
  • Baf or soft file;
  • Liquid to remove the sticky layer.

2-207-1.jpg?1557944303388

2-207-2.jpg?1557944339760

First, apply the base, as well as color coating. We applied two layers of dark blue gel varnish BLUESKY (shade 79).

2-207-3.jpg?1557944374753

For design we take the slider from BPW.Style (number 2-207).

2-207-4.jpg?1557944448964

This design can be laid out on any background, and it will give us the effect of printed foil and web for a few minutes.

To do this, we apply a base on the color coating, and at the same time place the design in water.

After the slider is separated from the substrate, put it on the base and gently smooth on the surface. At the end of an extra long bend and send to the lamp.

Take a soft nail file or buff and remove the extra length of the slider.

We seal the design with two layers of any top.

Here we have a wonderful design with foil and net.

2-207-5.jpg?1557944565837

2-207-6.jpg?1557944595060

2-207-7.jpg?1557944624830

Follow us on Instagram and Facebook so as not to miss the latest news.

Design with lavender

11 May 2019
by Елена Иванова

To perform this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Gel polish lamp;
  • Paper napkin;
  • Silicone brush;
  • Liquid to remove the sticky layer.

3d230-1.jpg?1557558322243

3d230-2.jpg?1557558354239

As the main color is ideal pale-lavender KODI (number 134).

3d230-3.jpg?1557558441805

And for design we take a slider from BPW.Style with GLASS effect.

3d230-5.jpg?1557558517737

This design looks very similar to the FLASH design, but also shimmers in the light, but it has the effect of 3D.

And this means that we will mount it in the same way as any other 3D slider.

Apply a thin layer of base on the color coating. At the same time, we separate the design from the substrate with the help of water and carefully put it on the dry base.

Silicone brush smooths the design and placed in the lamp for polymerization.

To consolidate the design, we use a top that does a good job with sealing a slider. We used the top from MollonPRO.

Dry and remove the sticky layer.

Here we have such a spring design with lavender.

3d230-8.jpg?1557558681485

3d230-9.jpg?1557558716087

3d230-10.jpg?1557558751736

3d230-11.jpg?1557558813485

3d230-12.jpg?1557558896028

Follow us on Instagram and Facebook so as not to miss the latest news.

Design with floral elements

05 May 2019
by Елена Иванова

To perform this design, we need:


  • Base and top for gel polish;
  • White gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Color gel polish;
  • Liquid to remove the sticky layer;
  • Baf to remove the extra length of the slider from the end.

3d144-1.jpg?1557069951257

3d144-2.jpg?1557069971616

To begin with, we apply the base and white gel polish.

3d144-3.jpg?1557070000594

As a design, use the slider from BPW.Style (number 3d-144).

3d144-4.jpg?1557070035061

Apply a thin layer of base to the white color.

Cut the slider and put it in the water for a few seconds. After that, using a paper napkin, we remove water from the design and remove it from the substrate.

Tweezers gently put the design on the base and smooth it with a silicone brush.

Put in the lamp to dry.

With the help of the buff, we remove the extra length on the end.

Next, take the top and gently cover the entire surface, trying to pay special attention to the ends and edges of the slider. In order not to smooth the volume elements on the slider, it is better to use a well wrung out top brush.

Dry and remove the sticky layer.

This is such a cute design with voluminous leaves and twigs.

3d144-5.jpg?1557070106055

3d144-6.jpg?1557070138674

3d144-7.jpg?1557070170898

3d144-8.jpg?1557070279845

Follow us on Instagram and Facebook so as not to miss the latest news.

Pop Art Manicure

01 May 2019
by Елена Иванова

In the assortment of our store you will find a huge selection of stickers pop art, because the design in this style is gaining popularity again. Today we will show an example of a manicure with voluminous pop art elements.

To perform this manicure, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

3d168-1.jpg?1556690347981

3d168-2.jpg?1556690425945

First, apply the base and color coating. Today we have a bright blue gel gel Polish Masura (number 290-125)

3d168-3.jpg?1556690483139

As a design, take the slider from BPW.Style (number 3d-168) with 3D effect.

3d168-4.jpg?1556690507049

Scissors carefully cut out the fragments of the design and put them in the water.

Apply a thin layer of base to the color coating.

Design we get out of the water and put on a paper napkin to get wet water. After that, we separate the design from the substrate and put it on the base.

With a silicone brush, gently smooth it on the surface and dry it into a lamp.

We put the top on top, sealing the design. We use a little material so as not to smooth the effect of volume.

Dry and remove the sticky layer.

Here we have such a bright manicure.

3d168-5.jpg?1556690592436

3d168-6.jpg?1556690617023

3d168-7.jpg?1556690641297

Follow us on Instagram and Facebook so as not to miss the latest news.

Summer coral design

28 Apr 2019
by Елена Иванова

Today we will consider another design option with glass effect series sliders.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Scissors;
  • Tweezers;
  • Slider design;
  • Silicone brush;
  • Paper napkin;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

3d215-1.jpg?1556459636296

3d215-2.jpg?1556459667591

First you need to apply the base and color coating. Today we chose the pale lavender Kodi (50LC shade).

3d215-3.jpg?1556459696499

And as a design we take a slider from BPW.Style with a glass effect (number 3d-215).

3d215-4.jpg?1556459729192

This design is suitable for the substrate of any color, while it is already decorated with glass pebbles imitating rhinestones.

To work with the design you need to take the scissors and cut out the design. After that, place it in water.

At the same time, apply a thin layer on the color coating. The base does not need to be dried, it will fix the design on the surface.

Slider get out of the water and put on a paper napkin to remove water.

Separate the film with a pattern from the substrate and carefully laid on the base. Light movements smooth the design on the surface with a silicone brush.

Dry in the lamp.

In order to fix the design, as well as to give the surface a gloss and even out small irregularities, we take the top and apply it with a thin layer on top. It is better to cover volume elements very thinly, or to go around them with a brush in order not to smooth out the volume.

Dry and remove the sticky layer.

This is a delicate design with bright coral elements

3d215-5.jpg?1556459816578

3d215-7.jpg?1556459851339

3d215-8.jpg?1556459878819

3d215-9.jpg?1556459909242

3d215-10.jpg?1556459969447

Follow us on Instagram and Facebook so as not to miss the latest news.

Design with volume dots

26 Apr 2019
by Елена Иванова

Today we will consider another design option with three-dimensional elements.

To perform this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider;
  • Scissors;
  • Tweezers;
  • Water;
  • Silicone brush;
  • Paper napkin;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

3d193-1.jpg?1556303395132

3d193-2.jpg?1556303452415

First, apply the base and color coating. Today we have chosen 5 delicate pastel colors.

3d193-3.jpg?1556303482814

As a design, take the slider with the effect of 3D (number 3D-193).

3d193-4.jpg?1556303514391

To consolidate the volumetric design, we use the “wet base” method.

To do this, cut out the fragments of the design and place them in the water.

Apply a thin layer on the color coating. Do not dry!

Design we get out of the water, put on a paper napkin to remove excess water.

Carefully, with tweezers, put the design on the base and smooth it on the surface with a silicone brush. Dry in the lamp.

Wrung out with a brush top cover design, seal the corners of the film and dry in the lamp. Remove the sticky layer.

Such a tender and unusual design with volumetric elements turned out to be ours.

3d193-5.jpg?1556303659362

3d193-6.jpg?1556303721525

3d193-7.jpg?1556303763417

3d193-8.jpg?1556303792553

3d193-9.jpg?1556303864854

3d193-10.jpg?1556303900711

Follow us on Instagram and Facebook so as not to miss the latest news.

Nude manicure with white tracery

26 Apr 2019
by Елена Иванова

This is a combination of white shades. Today we will show you an example of such a successful design.

For the work we need:

  • Base and gel polish;
  • Beige gel polish;
  • Dense white gel polish or gel paint;
  • Sponge or brush to create a gradient effect;
  • Slider design;
  • Water;
  • Tweezers;
  • Scissors;
  • Paper napkin;
  • Baf;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

5-1522-1.jpg?1556305613602

5-1522-2.jpg?1556305640057

First, apply the base and color coating. Today we applied KODI beige gel polish (20 CH shade), and also made a gradient with Cristina white gel polish (1323 shade).

5-1522-3.jpg?1556305670407

As a design, take the slider from BPW.Style (number 5-1522).

5-1522-4.jpg?1556305708223

To fix the slider, we need any sparse base.

Cut the design with scissors and put in the water for a few seconds.

Apply a thin layer of base to the color coating.

Design we get out of the water and put on a paper napkin to remove the water.

We put the design on the undisclosed base and use a silicone brush to smooth it on the surface.

Dry in the lamp.

We fix the design with two layers of top. Dry and remove the sticky layer.

Such a tender and very cute design with white patterns turned out to be ours.

5-1522-5.jpg?1556305767274

5-1522-6.jpg?1556305819745

5-1522-7.jpg?1556305849453

Follow us on Instagram and Facebook so as not to miss the latest news.

Nude manicure with design

22 Apr 2019
by Елена Иванова

Sliders - a great way to diversify a boring nude manicure.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Baf;
  • Liquid to remove the sticky layer.

5-1523-1.jpg?1555956277583

5-1523-2.jpg?1555956300166

At first we put base and color gel varnish. Today we chose Kodi gel polish (shade CH20).

5-1523-3.jpg?1555956329722

As a design, take the slider from BPW.Style (number 5-1523). This design is suitable for the base of any color, and even on dark colors it remains bright and saturated.

5-1523-4.jpg?1555956359104

To fix the design, we use the “wet base” method, since this design reaches the end of the nail plate.

  1. At first we put a thin layer of base on a color covering;
  2. Cut out the design of the nail and put in water for a few seconds;
  3. Using a paper napkin, remove water from the design;
  4. Separate the slider from the substrate and put it on an undamped base;
  5. Silicone brush smooths out any irregularities;
  6. The extra length at the end bend;
  7. We place in the lamp;
  8. With the help of a top, we seal the design with two layers, smooth out all the irregularities on the surface of the nail plate;
  9. Dry and remove the sticky layer;

This is a nude manicure with bright patterns.

5-1523-5.jpg?1555956487917

5-1523-7.jpg?1555956517566

5-1523-6.jpg?1555956549229

Follow us on Instagram and Facebook so as not to miss the latest news.

Geometric manicure with tracery

12 Apr 2019
by Елена Иванова

What nail design do you like more - geometric, gradient or monogram? With our sliders do not have to choose, because all this is combined in one set.

In today's review, we will consider a version of a manicure with a 5-1525 design. It should be noted that this slider will look good on a varnish of any color.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Baf;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

5-1525-1.jpg?1555086771016

5-1525-2.jpg?1555086797738

First, apply the base and color coating. Today we have chosen a delicate pink gel polish from Formula Pro. (Shade 705).

5-1525-3.jpg?1555086827660

As a design, take the slider from BPW.Style (number 5-1525).

5-1525-4.jpg?1555086859892

First, cut the slider and put it in the water. After a few seconds, we get the design and put it on a paper napkin to soak up the water.

Apply a thin layer of base to the color coating.

Separating the design from the substrate, gently lay it on the base and smooth with a silicone brush. The extra length of the design at the end we bend. Dry in the lamp.

Putting the buff perpendicular to the nail plate, remove the extra length.

Next, take the top and cover it with the entire surface of the nail, sealing the design.

Dry and remove the sticky layer.

Here we have got such a gentle manicure with monograms.

5-1525-5.jpg?1555086986369

5-1525-6.jpg?1555087017879

Follow us on Instagram and Facebook so as not to miss the latest news.

Design with banans

12 Apr 2019
by Елена Иванова

Not sure which manicure to offer the most picky customers? We are sure that among our sliders everyone will find a design to his taste!

Today we will make an unusual design with funny cartoon bananas.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

5-1526-1.jpg?1555092133465

5-1526-2.jpg?1555092174635

First, apply the base and color coating. Today we chose the bright yellow gel polish Cristina (number 1432).

5-1526-3.jpg?1555092247258

As a design, we take a slider from BPW.Style for any background (number 5-1526)

5-1526-4.jpg?1555092296695

This design does not occupy the entire area of color coating, so we will consolidate it in a simpler and faster way, using the top from MollonPRO, which copes well with this task.

Apply a thin layer of the top to the color coating and place it in the lamp for 5 seconds.

We cut out the design and with the help of water separate it from the substrate.

Use tweezers to put the design on the sticky layer of the top, align it on the surface of the material, and press all the air bubbles with a silicone brush.

Dry in the lamp for another 1 minute.

From above we put two more layers of a top, well leveling a surface and we seal design. Dried and removed the sticky layer.

Here we have a bright design with funny bananas.

5-1526-5.jpg?1555092386971

5-1526-6.jpg?1555092438449

5-1526-7.jpg?1555092490870

5-1526-8.jpg?1555092547278

Follow us on Instagram and Facebook so as not to miss the latest news.

Cornflower manicure

07 Apr 2019
by Елена Иванова

Manicure using a slider looks very interesting and harmonious if the design is made in the same color scheme. Today we will show an example of a perfect combination of the tone of varnish and slider on the example of design 6-113.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Water;
  • Tweezers;
  • Paper napkin;
  • Silicone brush;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

6-113-1.jpg?1554626965276

6-113-2.jpg?1554627074776

At first we put base, and also color gel varnish. Today we have chosen pink and cornflower shades.

6-113-3.jpg?1554627099753

As a design, take the slider from BPW.Style (number 6-113).

6-113-4_.jpg?1554627398178

Cut slider fragments and put in water for a few seconds.

On the color coating apply top suitable for securing the slider. We as usual used top from MollonPRO. We cure in the lamp for 5 seconds.

We take the design out of the water, put it on a paper napkin to remove water from it. Separate the design from the substrate and put it on the sticky layer of the top.

Silicone brush smooth film and put your hand in the lamp for another minute.

The same top cover the nail plate, sealing the design.

Dry and remove the sticky layer.

Here we have such a gentle design.

6-113-5.jpg?1554627482813

6-113-6.jpg?1554627506125

6-113-7.jpg?1554627531090

Follow us on Instagram and Facebook so as not to miss the latest news.

Дизайн с тропическими листьями

07 Apr 2019
by Елена Иванова

What kind of drawing except for flower prints can you most often find on your nails in the summer? Of course tropical leaves! Black and white, classic green and colored neon ... in the assortment of our store a whole line of sliders with monster leaves. Today we will show an example of a manicure with design 5-1521.

For the work we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Water;
  • Tweezers;
  • Silicone brush;
  • Paper napkin;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.

5-1521-1.jpg?1554628597314

5-1521-2.jpg?1554628621842

Apply base and color coating. Today we have chosen soft blue and light yellow shades.

5-1521-3.jpg?1554628646061

And as a design, take a slider from BPW.Style, suitable for working with any background (number 5-1521).

5-1521-4.jpg?1554628678554

First, cut out the design fragments, adjusting them to the size of the nail plate.

Put the design in the water.

At the same time, apply a thin layer of the base on the color coating.

After blotting the design on a paper napkin, separate it from the substrate and put it on the undoled base.

Silicone brush smooths the design surface, we press the corners of the film.

Dry in the lamp.

We cover the design with a top, sealing the entire design with the material.

Dry and remove the sticky layer.

Here we have a summer design with tropical leaves.

5-1521-5.jpg?1554628791524

5-1521-6.jpg?1554628813663

5-1521-8.jpg?1554628863149

5-1521-7.jpg?1554628833385

5-1521-9.jpg?1554629055116

Follow us on Instagram and Facebook so as not to miss the latest news.