, ,

Design with leopard pattern

22 Jun 2019
by Елена Иванова

To perform this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Silicone brush;
  • Paper napkin;
  • Gel polish lamp;
  • Liquid to remove the sticky layer.



First, apply the base and color coating. Today we chose the bright red gel varnish Cristina (number 1412).


And for design we take a slider from BPW.Style (number 5-1590).


First, cut the slider and put it in the water for a few seconds.

Apply a thin layer of MollonPRO top to the color coat and place it in the lamp for 5 seconds.

Slider get out of the water and put on a paper napkin to remove water. Separate from the substrate and put on a sticky layer of the top.

Silicone brush smooths the design on the top and send it to the lamp.

After the design top is dry, cover the design with the same top. Dry and remove the sticky layer.

Here we have such a bright design with animal design.






Follow us on Instagram and Facebook so as not to miss the latest news.


No posts found

New post