Today we will consider another design option with three-dimensional elements.
To perform this design, we need:
First, apply the base and color coating. Today we have chosen 5 delicate pastel colors.
As a design, take the slider with the effect of 3D (number 3D-193).
To consolidate the volumetric design, we use the “wet base” method.
To do this, cut out the fragments of the design and place them in the water.
Apply a thin layer on the color coating. Do not dry!
Design we get out of the water, put on a paper napkin to remove excess water.
Carefully, with tweezers, put the design on the base and smooth it on the surface with a silicone brush. Dry in the lamp.
Wrung out with a brush top cover design, seal the corners of the film and dry in the lamp. Remove the sticky layer.
Such a tender and unusual design with volumetric elements turned out to be ours.
No posts found