Autumn is very close, and so it's time to introduce you to our latest products from the autumn collection of sliders. Let's start with bulk leaves with a metallized print.
To complete this design, we need:
First, apply the base and color coating. We chose a gray gel polish from Rosalind (shade 2905).
And for the design we take the BPW.Style slider (number 3d2010).
Since the design is voluminous, we will mount it on a wet base.
To do this, cut out the design and put it on a cotton pad moistened with water. At the same time, we apply a thin layer of the base on the color coating (the base can be any, we prefer to use a thin one for these purposes).
The design is separated from the substrate and carefully put it on tweezers with an unbroken base. Using a silicone brush, gently smooth it on the surface and send it to the lamp to dry.
After the base and slider have dried, we fix the design from above with the top, while trying to maintain the effect of volume. Dry and remove the sticky layer.
Here is such an autumn design with leaves, we have succeeded.
No posts found