, ,

Graphic design with snowflakes

15 Dec 2019
by Елена Иванова

To complete this design, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Silicone brush;
  • Lamp for the polymerization of gel polish;
  • Sticky layer remover;
  • A cotton pad soaked in water;
  • Bafik.

5-1738-1.jpg?1576394153819

5-138-2.jpg?1576394669093

First, apply the base and color coating. Today we chose sky blue gel polish from NeoNail (shade 3648).

5-1738-3.jpg?1576394707512

And for design we take a slider with snowflakes from BPW.Style (number 5-1738).

5-1738-4.jpg?1576394756261

In order to fix the design, you need to take a few simple steps.

We cut out the design and put it in water, or on a cotton pad soaked in water with the substrate down;

Apply a thin layer of the base to the color coating. It is better to use a thin base, as this will allow you to apply it as thin as possible.

If the design was in water, remove excess fluid by wetting the design on a paper towel. Next, we separate the design from the substrate and lay it on the surface with tweezers.

With a silicone brush we align the design, press it to the material and send it to the lamp for 30 seconds.

The base and design are dry, the design is well fixed, now you can remove the extra length from the end. To do this, take a baf or a glass file, bring it perpendicular to the end and cut it off.

To fix the design from above, as well as to even out small irregularities, we cover the design with two layers of top. Dry and remove the sticky layer.

Here we have such a winter design with snowflakes.

5-1738-5.jpg?1576394849212

5-1738-6.jpg?1576394891382

5-1738-10.jpg?1576394955430

5-1738-11.jpg?1576394998749

5-1738-12.jpg?1576395037948

Follow us on Instagram and Facebook so as not to miss the latest news.


Comments

No posts found

New post