To complete this design, we need:
First, apply the base and color coating. Today I chose a white background for bright colors (Cristina gel polish, number 1323).
And for design, we took a slider from BPW.Style with Glass effect (number 3d-228).
We cut out the design and put it on a cotton pad moistened with water.
While the design is getting wet, we applied a thin layer of a thin base to the color coating. We do not dry the base. The design is separated from the substrate and neatly laid on an unpainted base. Since the base begins to melt the film, it is better to lay the design straight evenly. With a silicone brush we align the design on the surface, press the corners and send it to the lamp for 30 seconds.
After the base has dried and the design is fixed on the surface, using the buff, we remove the extra length of the slider from the end.
To fix the design from above, we take the top and with a well-wrung brush we go from above, covering the entire area with material. Dry and remove the sticky layer.
No posts found