To complete this design, we need:
First, apply the base and color coating. Today we chose a black background.
And for design we take a slider from BPW.Style (number 1-1166).
Cut the slider and put it on the cotton pad moistened in water with the substrate down.
Apply a thin layer of the top to the color coating and polymerize in the lamp for about 5 seconds. The top is better to choose viscous and thick, such qualities of the top are more suitable for securing the slider. I used the top from MollonPRO.
The design is separated from the substrate and laid on the sticky layer of the top. With a silicone brush or an orange stick, carefully align the design on the surface and send it to the lamp for another 30 seconds.
We seal the design with the same top. Dry and remove the sticky layer.
Here we have such an autumn design
No posts found