, ,

Geometric manicure with metallic effect

06/10/2018
by Елена Иванова

Today, the choice of products for the design of nails is incredibly wide and every lover of the original manicure can easily find something to taste. A special place in the line of materials for design is occupied by water stickers - sliders, which can be used alone or in combination with other types of decor. We suggest you consider the option of manicure, where the sliders are supplemented with a metal glitter.

To perform this manicure we will need:

  • Base for gel-polish;
  • Black gel-polish;
  • Top without sticky layer;
  • Rubbing with the effect of metal;
  • Slider design;
  • Top for slider design;
  • Scissors;
  • Tweezers;
  • Water;
  • Napkin;
  • The buff;
  • Silicone brush / orange stick / silicone claw;
  • Lamp for polymerization of gel-varnish;
  • Liquid for removing the sticky layer.

1-1346-1-min.jpg?1528611459126

1-1346-2-min.jpg?1528611502421

First you need to put the base, if necessary, strengthen and align the nail plate. In this case, alignment plays a big role, since the mirror coating emphasizes any unevenness. After the base, apply a black gel-polish.

1-1346-3-min.jpg?1528611587390

After you have a dense black coating, you need to apply the top without an adhesive layer. It is better to apply the top one for each nail, and immediately after the polymerization in the lamp begin to rub the gloss. We recommend rubbing with a fat-free finger, but you can also rub silicone brush or sponge.

1-1346-4-min.jpg?1528611640881

Once you have obtained the desired metallic effect, you need to shake off excess dust, so as not to let it into the top and that the coating looks evenly mirrored. It is also important to go through a buff on the butt to remove excess material, otherwise the manicure will begin to chip. But do not overdo it, because you can remove the excess.

To decorate our manicure we choose nail decal by BPW 1-1346.

1-1346-5-min.jpg?1528611724085

To fix this design, we used the top MollonPRO, which is well suited for this purpose. Fixing the slider design, we do the following:

  • Apply the top thin layer;
  • Dry for about five seconds in a lamp;
  • On the sticky layer of the top we put the slider, level and smooth it;
  • Dry the minute in the lamp;
  • We cover with two more layers of this top (always paying special attention to the butt);
  • Remove the sticky layer.

Here we have such a wonderful manicure with a metallic effect and a futuristic design.

1-1346-6-min.jpg?1528611905408

1-1346-7-min.jpg?1528611938188

1-1346-8-min.jpg?1528611963176

1-1346-9-min.jpg?1528611996600

1-1346-10-min.jpg?1528612026461

Follow us on Instagram and Facebook so as not to miss the latest news.


Comments

No posts found

New post