, ,

Geometric pattern

10/14/2018
by Елена Иванова

To perform this manicure, we need:

  • Base and top for gel polish;
  • Color gel polish;
  • Slider design;
  • Scissors;
  • Tweezers;
  • Silicone brush;
  • Water;
  • Liquid to remove the sticky layer;
  • Lamp for the polymerization of gel polish.

1-1410-1-min.jpg?1539547062966

1-1410-2-min.jpg?1539547091967

To begin with, we strengthen and align the nail plate with the help of a thick base.

1-1410-3-min.jpg?1539547126608

We chose the Formula Pro gel pink varnish (shade 705) as the main color and covered it with a silver shimmer (Cristina, shade 1367).

1-1410-4-min.jpg?1539547167596

As a decoration we take a slider design from BPW (number 1-1409).

1-1410-5-min.jpg?1539547235409

This type of slider design has long been familiar to us, it is very similar to the usual slider with white patterns, the only difference is that there is also black color.

For fixing, you can use any method you like that you trust. We stopped at the option of fixing the slider on the top.

To do this, apply a thin layer of a thick viscous top on the colored coating and dry it for five seconds in the lamp.

On the appeared sticky layer of the top, put the slider design and use a silicone brush to align the film with the pattern, and then put your hand in the lamp for 1 minute.

After that, with the help of a buff, you can remove the excess length of the slider from the end of the nail, but be careful not to spray onto the nail plate.

Well, then just fix the slider with another layer of top, well seal the corners of the design, dry in the lamp, remove the sticky layer and enjoy the result.

1-1410-6-min.jpg?1539547306234

1-1410-7-min.jpg?1539547327689

1-1410-8-min.jpg?1539547355631

Follow us on Instagram and Facebook so as not to miss the latest news.


Comments

No posts found

New post