, ,

Volume geometric manicure

07/09/2018
by Елена Иванова

We continue to acquaint you with the main trends of the manicure season SPRING / SUMMER. And of course you can not ignore the manicure with geometric motifs. There are a lot of options for doing such a manicure, but we suggest traditional idea of creating a geometric manicure with the help of sliders for nails BPW.style and we will use not ordinary sliders, but stickers with 3d effect

To complete this design, we will need:

  • Colored gel-polish;
  • Scissors;
  • Slider design with 3D effect;
  • Tweezers;
  • Silicone brush;
  • Water;
  • Top for slider design;
  • Lamp for polymerization of gel-polish;
  • Liquid for removing the sticky layer.

3d114-1-min.jpg?1531107991518

For the basis of this design, we decide to choose a black background.

3d114-2-min.jpg?1531108029266

To get a geometric design with a volume effect, we took a slider design from BPW (номер 3D-114).

3d114-3-min.jpg?1531108108466


We have already said many times that we prefer to fix the bulk design on a wet base, but this time we decided to fix the design with a top, since the volume elements are not very "dense".

In this case, any top will not work: you must always choose a thick and viscous, suitable for working with a slider design. One of these tops is the top of MollonPRO.

In order to fix the slider-design with top, we do the following:

  • We put on a color coating a thin layer of top;
  • Dry the top for a few seconds (5-10). This is not necessary, but with a slightly dried top it's easier to work: the slider design slides well over the sticky layer, the film does not melt. You can also put design on the undried top, but you need to work more carefully.
  • Cut out the design according to the shape of the nails, lower it into the water, dip it through a dry paper napkin and put it on the top.
  • Align the slider with a silicone brush, remove the air from under the film.
  • Let's dry the lamp for a minute.
  • With the help of a baf or glass nail file, we remove the extra length of the design. I do not recommend using a primer, it will only pull the paint behind it.
  • A well-pressed brush from the top covers the design. Use a lot of material is not worth it, it will flow into the recesses and align the nail plate, destroying the effect of volume, and we do not need this in this case.
  • Dry in the lamp and if necessary repeat the previous point again.
  • Remove the sticky layer.

Here we have such a wonderful geometric design.

3d114-4-min.jpg?1531108176160

3d114-5-min.jpg?1531108219326

3d114-6-min.jpg?1531108256970

Follow us on Instagram and Facebook so as not to miss the latest news. и первыми узнавайте о наших новинках и акциях!


Comments

No posts found

New post